home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
bit
/
src
/
jpeg
/
jcpipe.c
< prev
next >
Wrap
C/C++ Source or Header
|
1994-08-01
|
27KB
|
737 lines
/*
* jcpipe.c
*
* Copyright (C) 1991, 1992, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains compression pipeline controllers.
* These routines are invoked via the c_pipeline_controller method.
*
* There are four basic pipeline controllers, one for each combination of:
* single-scan JPEG file (single component or fully interleaved)
* vs. multiple-scan JPEG file (noninterleaved or partially interleaved).
*
* optimization of entropy encoding parameters
* vs. usage of default encoding parameters.
*
* Note that these conditions determine the needs for "big" arrays:
* multiple scans imply a big array for splitting the color components;
* entropy encoding optimization needs a big array for the MCU data.
*
* All but the simplest controller (single-scan, no optimization) can be
* compiled out through configuration options, if you need to make a minimal
* implementation.
*/
#include "jinclude.h"
/*
* About the data structures:
*
* The processing chunk size for downsampling is referred to in this file as
* a "row group": a row group is defined as Vk (v_samp_factor) sample rows of
* any component after downsampling, or Vmax (max_v_samp_factor) unsubsampled
* rows. In an interleaved scan each MCU row contains exactly DCTSIZE row
* groups of each component in the scan. In a noninterleaved scan an MCU row
* is one row of blocks, which might not be an integral number of row groups;
* for convenience we use a buffer of the same size as in interleaved scans,
* and process Vk MCU rows in each burst of downsampling.
* To provide context for the downsampling step, we have to retain the last
* two row groups of the previous MCU row while reading in the next MCU row
* (or set of Vk MCU rows). To do this without copying data about, we create
* a rather strange data structure. Exactly DCTSIZE+2 row groups of samples
* are allocated, but we create two different sets of pointers to this array.
* The second set swaps the last two pairs of row groups. By working
* alternately with the two sets of pointers, we can access the data in the
* desired order.
*/
/*
* Utility routines: common code for pipeline controllers
*/
LOCAL void
interleaved_scan_setup (compress_info_ptr cinfo)
/* Compute all derived info for an interleaved (multi-component) scan */
/* On entry, cinfo->comps_in_scan and cinfo->cur_comp_info[] are set up */
{
short ci, mcublks;
jpeg_component_info *compptr;
if (cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
ERREXIT(cinfo->emethods, "Too many components for interleaved scan");
cinfo->MCUs_per_row = (cinfo->image_width
+ cinfo->max_h_samp_factor*DCTSIZE - 1)
/ (cinfo->max_h_samp_factor*DCTSIZE);
cinfo->MCU_rows_in_scan = (cinfo->image_height
+ cinfo->max_v_samp_factor*DCTSIZE - 1)
/ (cinfo->max_v_samp_factor*DCTSIZE);
cinfo->blocks_in_MCU = 0;
for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
compptr = cinfo->cur_comp_info[ci];
/* for interleaved scan, sampling factors give # of blocks per component */
compptr->MCU_width = compptr->h_samp_factor;
compptr->MCU_height = compptr->v_samp_factor;
compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
/* compute physical dimensions of component */
compptr->downsampled_width = jround_up(compptr->true_comp_width,
(long) (compptr->MCU_width*DCTSIZE));
compptr->downsampled_height = jround_up(compptr->true_comp_height,
(long) (compptr->MCU_height*DCTSIZE));
/* Sanity check */
if (compptr->downsampled_width !=
(cinfo->MCUs_per_row * (compptr->MCU_width*DCTSIZE)))
ERREXIT(cinfo->emethods, "I'm confused about the image width");
/* Prepare array describing MCU composition */
mcublks = compptr->MCU_blocks;
if (cinfo->blocks_in_MCU + mcublks > MAX_BLOCKS_IN_MCU)
ERREXIT(cinfo->emethods, "Sampling factors too large for interleaved scan");
while (mcublks-- > 0) {
cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
}
}
/* Convert restart specified in rows to actual MCU count. */
/* Note that count must fit in 16 bits, so we provide limiting. */
if (cinfo->restart_in_rows > 0) {
long nominal = cinfo->restart_in_rows * cinfo->MCUs_per_row;
cinfo->restart_interval = (UINT16) MIN(nominal, 65535L);
}
(*cinfo->methods->c_per_scan_method_selection) (cinfo);
}
LOCAL void
noninterleaved_scan_setup (compress_info_ptr cinfo)
/* Compute all derived info for a noninterleaved (single-component) scan */
/* On entry, cinfo->comps_in_scan = 1 and cinfo->cur_comp_info[0] is set up */
{
jpeg_component_info *compptr = cinfo->cur_comp_info[0];
/* for noninterleaved scan, always one block per MCU */
compptr->MCU_width = 1;
compptr->MCU_height = 1;
compptr->MCU_blocks = 1;
/* compute physical dimensions of component */
compptr->downsampled_width = jround_up(compptr->true_comp_width,
(long) DCTSIZE);
compptr->downsampled_height = jround_up(compptr->true_comp_height,
(long) DCTSIZE);
cinfo->MCUs_per_row = compptr->downsampled_width / DCTSIZE;
cinfo->MCU_rows_in_scan = compptr->downsampled_height / DCTSIZE;
/* Prepare array describing MCU composition */
cinfo->blocks_in_MCU = 1;
cinfo->MCU_membership[0] = 0;
/* Convert restart specified in rows to actual MCU count. */
/* Note that count must fit in 16 bits, so we provide limiting. */
if (cinfo->restart_in_rows > 0) {
long nominal = cinfo->restart_in_rows * cinfo->MCUs_per_row;
cinfo->restart_interval = (UINT16) MIN(nominal, 65535L);
}
(*cinfo->methods->c_per_scan_method_selection) (cinfo);
}
LOCAL void
alloc_sampling_buffer (compress_info_ptr cinfo, JSAMPIMAGE fullsize_data[2],
long fullsize_width)
/* Create a pre-downsampling data buffer having the desired structure */
/* (see comments at head of file) */
{
short ci, vs, i;
vs = cinfo->max_v_samp_factor; /* row group height */
/* Get top-level space for array pointers */
fullsize_data[0] = (JSAMPIMAGE) (*cinfo->emethods->alloc_small)
(cinfo->num_components * SIZEOF(JSAMPARRAY));
fullsize_data[1] = (JSAMPIMAGE) (*cinfo->emethods->alloc_small)
(cinfo->num_components * SIZEOF(JSAMPARRAY));
for (ci = 0; ci < cinfo->num_components; ci++) {
/* Allocate the real storage */
fullsize_data[0][ci] = (*cinfo->emethods->alloc_small_sarray)
(fullsize_width,
(long) (vs * (DCTSIZE+2)));
/* Create space for the scrambled-order pointers */
fullsize_data[1][ci] = (JSAMPARRAY) (*cinfo->emethods->alloc_small)
(vs * (DCTSIZE+2) * SIZEOF(JSAMPROW));
/* Duplicate the first DCTSIZE-2 row groups */
for (i = 0; i < vs * (DCTSIZE-2); i++) {
fullsize_data[1][ci][i] = fullsize_data[0][ci][i];
}
/* Copy the last four row groups in swapped order */
for (i = 0; i < vs * 2; i++) {
fullsize_data[1][ci][vs*DCTSIZE + i] = fullsize_data[0][ci][vs*(DCTSIZE-2) + i];
fullsize_data[1][ci][vs*(DCTSIZE-2) + i] = fullsize_data[0][ci][vs*DCTSIZE + i];
}
}
}
#if 0 /* this routine not currently needed */
LOCAL void
free_sampling_buffer (compress_info_ptr cinfo, JSAMPIMAGE fullsize_data[2])
/* Release a sampling buffer created by alloc_sampling_buffer */
{
short ci;
for (ci = 0; ci < cinfo->num_components; ci++) {
/* Free the real storage */
(*cinfo->emethods->free_small_sarray) (fullsize_data[0][ci]);
/* Free the scrambled-order pointers */
(*cinfo->emethods->free_small) ((void *) fullsize_data[1][ci]);
}
/* Free the top-level space */
(*cinfo->emethods->free_small) ((void *) fullsize_data[0]);
(*cinfo->emethods->free_small) ((void *) fullsize_data[1]);
}
#endif
LOCAL void
downsample (compress_info_ptr cinfo,
JSAMPIMAGE fullsize_data, JSAMPIMAGE sampled_data,
long fullsize_width,
short above, short current, short below, short out)
/* Do downsampling of a single row group (of each component). */
/* above, current, below are indexes of row groups in fullsize_data; */
/* out is the index of the target row group in sampled_data. */
/* Special case: above, below can be -1 to indicate top, bottom of image. */
{
jpeg_component_info *compptr;
JSAMPARRAY above_ptr, below_ptr;
JSAMPROW dummy[MAX_SAMP_FACTOR]; /* for downsample expansion at top/bottom */
short ci, vs, i;
vs = cinfo->max_v_samp_factor; /* row group height */
for (ci = 0; ci < cinfo->num_components; ci++) {
compptr = & cinfo->comp_info[ci];
if (above >= 0)
above_ptr = fullsize_data[ci] + above * vs;
else {
/* Top of image: make a dummy above-context with copies of 1st row */
/* We assume current=0 in this case */
for (i = 0; i < vs; i++)
dummy[i] = fullsize_data[ci][0];
above_ptr = (JSAMPARRAY) dummy; /* possible near->far pointer conv */
}
if (below >= 0)
below_ptr = fullsize_data[ci] + below * vs;
else {
/* Bot of image: make a dummy below-context with copies of last row */
for (i = 0; i < vs; i++)
dummy[i] = fullsize_data[ci][(current+1)*vs-1];
below_ptr = (JSAMPARRAY) dummy; /* possible near->far pointer conv */
}
(*cinfo->methods->downsample[ci])
(cinfo, (int) ci,
fullsize_width, (int) vs,
compptr->downsampled_width, (int) compptr->v_samp_factor,
above_ptr,
fullsize_data[ci] + current * vs,
below_ptr,
sampled_data[ci] + out * compptr->v_samp_factor);
}
}
/* These variables are initialized by the pipeline controller for use by
* MCU_output_catcher.
* To avoid a lot of row-pointer overhead, we cram as many MCUs into each
* row of whole_scan_MCUs as we can get without exceeding 32Kbytes per row.
* NOTE: the "arbitrary" constant here must not exceed MAX_ALLOC_CHUNK
* defined in jmemsys.h, which is 64K-epsilon in most DOS implementations.
*/
#define MAX_WHOLE_ROW_BLOCKS ((int) (32768L / SIZEOF(JBLOCK))) /* max blocks/row */
static big_barray_ptr whole_scan_MCUs; /* Big array for saving the MCUs */
static int MCUs_in_big_row; /* # of MCUs in each row of whole_scan_MCUs */
static long next_whole_row; /* next row to access in whole_scan_MCUs */
static int next_MCU_index; /* next MCU in current row */
METHODDEF void
MCU_output_catcher (compress_info_ptr cinfo, JBLOCK *MCU_data)
/* Output method for siphoning off extract_MCUs output into a big array */
{
static JBLOCKARRAY rowptr;
if (next_MCU_index >= MCUs_in_big_row) {
rowptr = (*cinfo->emethods->access_big_barray) (whole_scan_MCUs,
next_whole_row, TRUE);
next_whole_row++;
next_MCU_index = 0;
}
/*
* note that on 80x86, the cast applied to MCU_data implies
* near to far pointer conversion.
*/
jcopy_block_row((JBLOCKROW) MCU_data,
rowptr[0] + next_MCU_index * cinfo->blocks_in_MCU,
(long) cinfo->blocks_in_MCU);
next_MCU_index++;
}
METHODDEF void
dump_scan_MCUs (compress_info_ptr cinfo, MCU_output_method_ptr output_method)
/* Dump the MCUs saved in whole_scan_MCUs to the output method. */
/* The method may be either the entropy encoder or some routine supplied */
/* by the entropy optimizer. */
{
/* On an 80x86 machine, the entropy encoder expects the passed data block
* to be in NEAR memory (for performance reasons), so we have to copy it
* back from the big array to a local array. On less brain-damaged CPUs
* we needn't do that.
*/
#ifdef NEED_FAR_POINTERS
JBLOCK MCU_data[MAX_BLOCKS_IN_MCU];
#endif
long mcurow, mcuindex, next_row;
int next_index;
JBLOCKARRAY rowptr = NULL; /* init only to suppress compiler complaint */
next_row = 0;
next_index = MCUs_in_big_row;
for (mcurow = 0; mcurow < cinfo->MCU_rows_in_scan; mcurow++) {
(*cinfo->methods->progress_monitor) (cinfo, mcurow,
cinfo->MCU_rows_in_scan);
for (mcuindex = 0; mcuindex < cinfo->MCUs_per_row; mcuindex++) {
if (next_index >= MCUs_in_big_row) {
rowptr = (*cinfo->emethods->access_big_barray) (whole_scan_MCUs,
next_row, FALSE);
next_row++;
next_index = 0;
}
#ifdef NEED_FAR_POINTERS
jcopy_block_row(rowptr[0] + next_index * cinfo->blocks_in_MCU,
(JBLOCKROW) MCU_data, /* casts near to far pointer! */
(long) cinfo->blocks_in_MCU);
(*output_method) (cinfo, MCU_data);
#else
(*output_method) (cinfo, rowptr[0] + next_index * cinfo->blocks_in_MCU);
#endif
next_index++;
}
}
cinfo->completed_passes++;
}
/*
* Compression pipeline controller used for single-scan files
* with no optimization of entropy parameters.
*/
METHODDEF void
single_ccontroller (compress_info_ptr cinfo)
{
int rows_in_mem; /* # of sample rows in full-size buffers */
long fullsize_width; /* # of samples per row in full-size buffers */
long cur_pixel_row; /* counts # of pixel rows processed */
long mcu_rows_output; /* # of MCU rows actually emitted */
int mcu_rows_per_loop; /* # of MCU rows processed per outer loop */
/* Work buffer for pre-downsampling data (see comments at head of file) */
JSAMPIMAGE fullsize_data[2];
/* Work buffer for downsampled data */
JSAMPIMAGE sampled_data;
int rows_this_time;
short ci, whichss, i;
/* Prepare for single scan containing all components */
if (cinfo->num_components > MAX_COMPS_IN_SCAN)
ERREXIT(cinfo->emethods, "Too many components for interleaved scan");
cinfo->comps_in_scan = cinfo->num_components;
for (ci = 0; ci < cinfo->num_components; ci++) {
cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
}
if (cinfo->comps_in_scan == 1) {
noninterleaved_scan_setup(cinfo);
/* Vk block rows constitute the same number of MCU rows */
mcu_rows_per_loop = cinfo->cur_comp_info[0]->v_samp_factor;
} else {
interleaved_scan_setup(cinfo);
/* in an interleaved scan, one MCU row contains Vk block rows */
mcu_rows_per_loop = 1;
}
cinfo->total_passes++;
/* Compute dimensions of full-size pixel buffers */
/* Note these are the same whether interleaved or not. */
rows_in_mem = cinfo->max_v_samp_factor * DCTSIZE;
fullsize_width = jround_up(cinfo->image_width,
(long) (cinfo->max_h_samp_factor * DCTSIZE));
/* Allocate working memory: */
/* fullsize_data is sample data before downsampling */
alloc_sampling_buffer(cinfo, fullsize_data, fullsize_width);
/* sampled_data is sample data after downsampling */
sampled_data = (JSAMPIMAGE) (*cinfo->emethods->alloc_small)
(cinfo->num_components * SIZEOF(JSAMPARRAY));
for (ci = 0; ci < cinfo->num_components; ci++) {
sampled_data[ci] = (*cinfo->emethods->alloc_small_sarray)
(cinfo->comp_info[ci].downsampled_width,
(long) (cinfo->comp_info[ci].v_samp_factor * DCTSIZE));
}
/* Tell the memory manager to instantiate big arrays.
* We don't need any big arrays in this controller,
* but some other module (like the input file reader) may need one.
*/
(*cinfo->emethods->alloc_big_arrays)
((long) 0, /* no more small sarrays */
(long) 0, /* no more small barrays */
(long) 0); /* no more "medium" objects */
/* Initialize output file & do per-scan object init */
(*cinfo->methods->write_scan_header) (cinfo);
cinfo->methods->entropy_output = cinfo->methods->write_jpeg_data;
(*cinfo->methods->entropy_encode_init) (cinfo);
(*cinfo->methods->downsample_init) (cinfo);
(*cinfo->methods->extract_init) (cinfo);
/* Loop over input image: rows_in_mem pixel rows are processed per loop */
mcu_rows_output = 0;
whichss = 1; /* arrange to start with fullsize_data[0] */
for (cur_pixel_row = 0; cur_pixel_row < cinfo->image_height;
cur_pixel_row += rows_in_mem) {
(*cinfo->methods->progress_monitor) (cinfo, cur_pixel_row,
cinfo->image_height);
whichss ^= 1; /* switch to other fullsize_data buffer */
/* Obtain rows_this_time pixel rows and expand to rows_in_mem rows. */
/* Then we have exactly DCTSIZE row groups for downsampling. */
rows_this_time = (int) MIN((long) rows_in_mem,
cinfo->image_height - cur_pixel_row);
(*cinfo->methods->get_sample_rows) (cinfo, rows_this_time,
fullsize_data[whichss]);
(*cinfo->methods->edge_expand) (cinfo,
cinfo->image_width, rows_this_time,
fullsize_width, rows_in_mem,
fullsize_data[whichss]);
/* Downsample the data (all components) */
/* First time through is a special case */
if (cur_pixel_row) {
/* Downsample last row group of previous set */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) DCTSIZE, (short) (DCTSIZE+1), (short) 0,
(short) (DCTSIZE-1));
/* and dump the previous set's downsampled data */
(*cinfo->methods->extract_MCUs) (cinfo, sampled_data,
mcu_rows_per_loop,
cinfo->methods->entropy_encode);
mcu_rows_output += mcu_rows_per_loop;
/* Downsample first row group of this set */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (DCTSIZE+1), (short) 0, (short) 1,
(short) 0);
} else {
/* Downsample first row group with dummy above-context */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (-1), (short) 0, (short) 1,
(short) 0);
}
/* Downsample second through next-to-last row groups of this set */
for (i = 1; i <= DCTSIZE-2; i++) {
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (i-1), (short) i, (short) (i+1),
(short) i);
}
} /* end of outer loop */
/* Downsample the last row group with dummy below-context */
/* Note whichss points to last buffer side used */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (DCTSIZE-2), (short) (DCTSIZE-1), (short) (-1),
(short) (DCTSIZE-1));
/* Dump the remaining data (may be less than full height if uninterleaved) */
(*cinfo->methods->extract_MCUs) (cinfo, sampled_data,
(int) (cinfo->MCU_rows_in_scan - mcu_rows_output),
cinfo->methods->entropy_encode);
/* Finish output file */
(*cinfo->methods->extract_term) (cinfo);
(*cinfo->methods->downsample_term) (cinfo);
(*cinfo->methods->entropy_encode_term) (cinfo);
(*cinfo->methods->write_scan_trailer) (cinfo);
cinfo->completed_passes++;
/* Release working memory */
/* (no work -- we let free_all release what's needful) */
}
/*
* Compression pipeline controller used for single-scan files
* with optimization of entropy parameters.
*/
#ifdef ENTROPY_OPT_SUPPORTED
METHODDEF void
single_eopt_ccontroller (compress_info_ptr cinfo)
{
int rows_in_mem; /* # of sample rows in full-size buffers */
long fullsize_width; /* # of samples per row in full-size buffers */
long cur_pixel_row; /* counts # of pixel rows processed */
long mcu_rows_output; /* # of MCU rows actually emitted */
int mcu_rows_per_loop; /* # of MCU rows processed per outer loop */
/* Work buffer for pre-downsampling data (see comments at head of file) */
JSAMPIMAGE fullsize_data[2];
/* Work buffer for downsampled data */
JSAMPIMAGE sampled_data;
int rows_this_time;
int blocks_in_big_row;
short ci, whichss, i;
/* Prepare for single scan containing all components */
if (cinfo->num_components > MAX_COMPS_IN_SCAN)
ERREXIT(cinfo->emethods, "Too many components for interleaved scan");
cinfo->comps_in_scan = cinfo->num_components;
for (ci = 0; ci < cinfo->num_components; ci++) {
cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
}
if (cinfo->comps_in_scan == 1) {
noninterleaved_scan_setup(cinfo);
/* Vk block rows constitute the same number of MCU rows */
mcu_rows_per_loop = cinfo->cur_comp_info[0]->v_samp_factor;
} else {
interleaved_scan_setup(cinfo);
/* in an interleaved scan, one MCU row contains Vk block rows */
mcu_rows_per_loop = 1;
}
cinfo->total_passes += 2; /* entropy encoder must add # passes it uses */
/* Compute dimensions of full-size pixel buffers */
/* Note these are the same whether interleaved or not. */
rows_in_mem = cinfo->max_v_samp_factor * DCTSIZE;
fullsize_width = jround_up(cinfo->image_width,
(long) (cinfo->max_h_samp_factor * DCTSIZE));
/* Allocate working memory: */
/* fullsize_data is sample data before downsampling */
alloc_sampling_buffer(cinfo, fullsize_data, fullsize_width);
/* sampled_data is sample data after downsampling */
sampled_data = (JSAMPIMAGE) (*cinfo->emethods->alloc_small)
(cinfo->num_components * SIZEOF(JSAMPARRAY));
for (ci = 0; ci < cinfo->num_components; ci++) {
sampled_data[ci] = (*cinfo->emethods->alloc_small_sarray)
(cinfo->comp_info[ci].downsampled_width,
(long) (cinfo->comp_info[ci].v_samp_factor * DCTSIZE));
}
/* Figure # of MCUs to be packed in a row of whole_scan_MCUs */
MCUs_in_big_row = MAX_WHOLE_ROW_BLOCKS / cinfo->blocks_in_MCU;
blocks_in_big_row = MCUs_in_big_row * cinfo->blocks_in_MCU;
/* Request a big array: whole_scan_MCUs saves the MCU data for the scan */
whole_scan_MCUs = (*cinfo->emethods->request_big_barray)
((long) blocks_in_big_row,
(long) (cinfo->MCUs_per_row * cinfo->MCU_rows_in_scan
+ MCUs_in_big_row-1) / MCUs_in_big_row,
1L); /* unit height is 1 row */
next_whole_row = 0; /* init output ptr for MCU_output_catcher */
next_MCU_index = MCUs_in_big_row; /* forces access on first call! */
/* Tell the memory manager to instantiate big arrays */
(*cinfo->emethods->alloc_big_arrays)
((long) 0, /* no more small sarrays */
(long) 0, /* no more small barrays */
(long) 0); /* no more "medium" objects */
/* Do per-scan object init */
(*cinfo->methods->downsample_init) (cinfo);
(*cinfo->methods->extract_init) (cinfo);
/* Loop over input image: rows_in_mem pixel rows are processed per loop */
/* MCU data goes into whole_scan_MCUs, not to the entropy encoder */
mcu_rows_output = 0;
whichss = 1; /* arrange to start with fullsize_data[0] */
for (cur_pixel_row = 0; cur_pixel_row < cinfo->image_height;
cur_pixel_row += rows_in_mem) {
(*cinfo->methods->progress_monitor) (cinfo, cur_pixel_row,
cinfo->image_height);
whichss ^= 1; /* switch to other fullsize_data buffer */
/* Obtain rows_this_time pixel rows and expand to rows_in_mem rows. */
/* Then we have exactly DCTSIZE row groups for downsampling. */
rows_this_time = (int) MIN((long) rows_in_mem,
cinfo->image_height - cur_pixel_row);
(*cinfo->methods->get_sample_rows) (cinfo, rows_this_time,
fullsize_data[whichss]);
(*cinfo->methods->edge_expand) (cinfo,
cinfo->image_width, rows_this_time,
fullsize_width, rows_in_mem,
fullsize_data[whichss]);
/* Downsample the data (all components) */
/* First time through is a special case */
if (cur_pixel_row) {
/* Downsample last row group of previous set */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) DCTSIZE, (short) (DCTSIZE+1), (short) 0,
(short) (DCTSIZE-1));
/* and dump the previous set's downsampled data */
(*cinfo->methods->extract_MCUs) (cinfo, sampled_data,
mcu_rows_per_loop,
MCU_output_catcher);
mcu_rows_output += mcu_rows_per_loop;
/* Downsample first row group of this set */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (DCTSIZE+1), (short) 0, (short) 1,
(short) 0);
} else {
/* Downsample first row group with dummy above-context */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (-1), (short) 0, (short) 1,
(short) 0);
}
/* Downsample second through next-to-last row groups of this set */
for (i = 1; i <= DCTSIZE-2; i++) {
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (i-1), (short) i, (short) (i+1),
(short) i);
}
} /* end of outer loop */
/* Downsample the last row group with dummy below-context */
/* Note whichss points to last buffer side used */
downsample(cinfo, fullsize_data[whichss], sampled_data, fullsize_width,
(short) (DCTSIZE-2), (short) (DCTSIZE-1), (short) (-1),
(short) (DCTSIZE-1));
/* Dump the remaining data (may be less than full height if uninterleaved) */
(*cinfo->methods->extract_MCUs) (cinfo, sampled_data,
(int) (cinfo->MCU_rows_in_scan - mcu_rows_output),
MCU_output_catcher);
/* Clean up after that stuff, then find the optimal entropy parameters */
(*cinfo->methods->extract_term) (cinfo);
(*cinfo->methods->downsample_term) (cinfo);
cinfo->completed_passes++;
(*cinfo->methods->entropy_optimize) (cinfo, dump_scan_MCUs);
/* Emit scan to output file */
/* Note: we can't do write_scan_header until entropy parameters are set! */
(*cinfo->methods->write_scan_header) (cinfo);
cinfo->methods->entropy_output = cinfo->methods->write_jpeg_data;
(*cinfo->methods->entropy_encode_init) (cinfo);
dump_scan_MCUs(cinfo, cinfo->methods->entropy_encode);
(*cinfo->methods->entropy_encode_term) (cinfo);
(*cinfo->methods->write_scan_trailer) (cinfo);
/* Release working memory */
/* (no work -- we let free_all release what's needful) */
}
#endif /* ENTROPY_OPT_SUPPORTED */
/*
* Compression pipeline controller used for multiple-scan files
* with no optimization of entropy parameters.
*/
#ifdef C_MULTISCAN_FILES_SUPPORTED
METHODDEF void
multi_ccontroller (compress_info_ptr cinfo)
{
ERREXIT(cinfo->emethods, "Not implemented yet");
}
#endif /* C_MULTISCAN_FILES_SUPPORTED */
/*
* Compression pipeline controller used for multiple-scan files
* with optimization of entropy parameters.
*/
#ifdef C_MULTISCAN_FILES_SUPPORTED
#ifdef ENTROPY_OPT_SUPPORTED
METHODDEF void
multi_eopt_ccontroller (compress_info_ptr cinfo)
{
ERREXIT(cinfo->emethods, "Not implemented yet");
}
#endif /* ENTROPY_OPT_SUPPORTED */
#endif /* C_MULTISCAN_FILES_SUPPORTED */
/*
* The method selection routine for compression pipeline controllers.
*/
GLOBAL void
jselcpipeline (compress_info_ptr cinfo)
{
if (cinfo->interleave || cinfo->num_components == 1) {
/* single scan needed */
#ifdef ENTROPY_OPT_SUPPORTED
if (cinfo->optimize_coding)
cinfo->methods->c_pipeline_controller = single_eopt_ccontroller;
else
#endif
cinfo->methods->c_pipeline_controller = single_ccontroller;
} else {
/* multiple scans needed */
#ifdef C_MULTISCAN_FILES_SUPPORTED
#ifdef ENTROPY_OPT_SUPPORTED
if (cinfo->optimize_coding)
cinfo->methods->c_pipeline_controller = multi_eopt_ccontroller;
else
#endif
cinfo->methods->c_pipeline_controller = multi_ccontroller;
#else
ERREXIT(cinfo->emethods, "Multiple-scan support was not compiled");
#endif
}
}